DSE9450 48 Volt 50 Amp Intelligent Battery Charger Software Downloads

The DSE9450 is a 48 Volt, 50 Amp Intelligent Battery Charger, designed with the power industry in mind, with quality, reliability and efficiency built in as standard. The DSE9450 can be programmed for different charging curves to maximise the life of the batteries. The battery charger is programmed using the user-friendly DSE Configuration Suite PC Software. 

DSE891 DSEWebNet® Gateway - Ethernet Only Software Downloads

The Gateway DSE891 connects to the DSE data server by an integral Ethernet connection only. This is most suited for fixed installations where an ADSL / DSL cable broadband service is available (external broadband modem required, not supplied by DSE).

DSE501 Manual Start Control Module Product Downloads

The DSE501K-1 is a Manual Engine Control Module designed to control the engine via a key switch on the front panel. The module is used to start and stop the engine, indicating fault conditions, automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation. Operation of the module is via a three position key switch mounted on the front panel with STOP(O), RUN(I) and START(II) positions. In the ‘O’ position the DC supply is removed...

DSE9452 24 Volt 50 Amp Intelligent Battery Charger Software Downloads

The DSE9452 is an intelligent battery charger that can be programmed for different charging curves to maximise the life of the battery. The DSE9452 is programmed using the user-friendly DSE Configuration Suite PC software. The charger is mounted to the chassis using the fixing holes that are built into the case and via a supplied bracket. The chargers’ stylish design includes three coloured LEDs to indicate charging status and fault conditions.Multiple chargers can be...

DSE890 DSEWebNet® Gateway - 3G (GSM)/Ethernet Software Downloads

The Gateway device connects to the DSE data server by integral Ethernet connection or GPRS (GSM or 3G). The unit also includes GPS (satellite location) functionality. A DSE GSM Antenna is required for correct operation of DSE890. 

DSE810 PC Configuration Software Interface Product Downloads

The 810 PC Software Configuration Interface is designed for use with the DSE5xx, DSE5xxx, DSE4200 and DSE710/720 control modules. It is intended to be used in conjunction with the DSE 810 configuration software. The interface enables the user to access the configuration stored within the module to allow changes to be made to the various settings. The interface kit comprises of:Interface module25 way to 9 way RS232 adapter cableInterconnecting FCC 68- 8 way cable which connects to the...

DSE5320 Auto Mains (Utility) Failure Control Module Software Downloads

The DSE5320 is an Automatic Mains Failure Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic and electronic engines. The module also provides advanced engine monitoring and protection features. The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator...

DSE808 PC Software Configuration Interface Product Downloads

DSE8721 Graphical Colour Remote Display Software Downloads

The DSE8721 remote display has been expertly designed to provide the DSE8610/60, DSE8610/60 MKII Load Share Control Modules and DSE8710/60 Rear Mounted Load Share Control Modules flexible graphical colour display options.  The remote display can be used in two ways. It can be connected to the rear mounted control module and mounted into the front door of a panel or used remotely (max 1.2km away) by connecting to the dedicated data communications link and placing the remote display in an...

DSE4410 (Single Phase) Auto Start Control Module (Single-Phase) Software Downloads

The DSE4410 Single Phase is an Auto Start Control Module for single genset applications.  The module has been designed to work with electronic and non-electronic applications providing advanced monitoring and protection features. The  module is available in CAN bus and magnetic pick-up versions (to be specified on ordering). The module includes a back-lit LCD display which clearly shows the status of the generator at all times. It monitors frequency, oil pressure, coolant temperature and...